Percona XtraDB Cluster is a high availability and high scalability solution for MySQL clustering. Percona XtraDB Cluster integrates Percona Server with the Galera library of MySQL high availability solutions in a single product package which enables you to create a cost-effective MySQL cluster.
The percona-cluster charm deploys Percona XtraDB Cluster and provides DB services to those charms that support the 'mysql-shared' interface. The current list of such charms can be obtained from the Charm Store (the charms officially supported by the OpenStack Charms project are published by 'openstack-charmers').
The eoan series is the last series supported by the percona-cluster charm. It is replaced by the mysql-innodb-cluster and mysql-router charms in the focal series. The migration steps are documented in percona-cluster charm: series upgrade to focal.
Caution: Do not upgrade (to the focal series) the machines hosting percona-cluster units. To be clear, if percona-cluster is containerised then it is the LXD container that must not be upgraded.
The procedure to upgrade to a pre-focal series, and thus to a new Percona version, is documented in the OpenStack Charms Deployment Guide.
This section covers common configuration options. See file
the full list of options, along with their descriptions and default values.
max-connections option set the maximum number of allowed connections.
The default is 600. This is an important option and is discussed in the Memory
min-cluster-size option sets the number of percona-cluster units required
to form its cluster. It is best practice to use this option as doing so ensures
that the charm will wait until the cluster is up before accepting relations
from other client applications.
nrpe-threads-connected option sets Warning and Critical thresholds (in percent)
for NRPE check to monitor the number of threads connecting to the MySQL.
nrpe-external-master relationship is set, a nagios user who does
not have permission and can only connect from localhost is created before
the check is created.
To deploy a single percona-cluster unit:
juju deploy percona-cluster
To make use of DB services, simply add a relation between percona-cluster and an application that supports the 'mysql-shared' interface. For instance:
juju add-relation percona-cluster:shared-db keystone:shared-db
Passwords required for the correct operation of the deployment are automatically generated and stored by the application leader. The root password for mysql can be retrieved using the following command:
juju run --unit percona-cluster/0 leader-get root-password
Root user DB access is only usable from within one of the deployed units (access to root is restricted to localhost only).
When machines hosting the percona-cluster units are started in order for the application to assume a clustered and healthy state particular steps are required to be taken. This is documented in the OpenStack Charms Deployment Guide.
Note that Percona XtraDB Cluster is not a 'scale-out' MySQL solution; reads and writes are channelled through a single service unit and synchronously replicated to other nodes in the cluster; reads/writes are as slow as the slowest node you have in your deployment.
When more than one unit is deployed with the hacluster application the charm
will bring up an HA active/active cluster. The
should be used (see description above).
To deploy a three-node cluster:
juju deploy -n 3 --config min-cluster-size=3 percona-cluster
There are two mutually exclusive high availability options: using virtual IP(s) or DNS. In both cases the hacluster subordinate charm is used to provide the Corosync and Pacemaker backend HA functionality.
See the OpenStack high availability appendix in the OpenStack Charms Deployment Guide for details.
This section lists Juju actions supported by the charm.
Actions allow specific operations to be performed on a per-unit basis. To
display action descriptions run
juju actions percona-cluster. If the charm is
not deployed then see file
Percona Cluster is extremely memory sensitive. Setting memory values too low will give poor performance. Setting them too high will create problems that are very difficult to diagnose. Please take time to evaluate these settings for each deployment environment rather than copying and pasting bundle configurations.
The Percona Cluster charm needs to be able to be deployed in small low memory development environments as well as high performance production environments. The charm configuration opinionated defaults favour the developer environment in order to ease initial testing. Production environments need to consider carefully the memory requirements for the hardware or cloud in use. Consult a MySQL memory calculator to understand the implications of the values.
Between the 5.5 and 5.6 releases a significant default was changed. The
performance schema defaulted to on for 5.6 and
later. This allocates all the memory that would be required to handle
max-connections plus several other memory settings. With 5.5 memory was
allocated during run-time as needed.
The charm now makes performance schema configurable and defaults to off (False). With the performance schema turned off memory is allocated when needed during run-time. It is important to understand this can lead to run-time memory exhaustion if the configuration values are set too high. Consult a MySQL memory calculator to understand the implications of the values.
The value of
max-connections should strike a balance between connection
exhaustion and memory exhaustion. Occasionally connection exhaustion occurs in
large production HA clouds with a value of less than 2000. The common practice
became to set it unrealistically high (near 10k or 20k). In the move to 5.6 on
Xenial this became a problem as Percona would fail to start up or behave
erratically as memory exhaustion occurred on the host due to performance schema
being turned on. Even with the default now turned off this value should be
carefully considered against the production requirements and resources
This charm supports MySQL asynchronous replication feature which can be used to replicate databases between multiple Percona XtraDB Clusters. In order to setup master-slave replication of "example1" and "example2" databases between "pxc1" and "pxc2" applications, first configure mandatory options:
juju config pxc1 databases-to-replicate="database1:table1,table2;database2" juju config pxc2 databases-to-replicate="database1:table1,table2;database2" juju config pxc1 cluster-id=1 juju config pxc2 cluster-id=2
and then relate them:
juju add-relation pxc1:master pxc2:slave
In order to setup master-master replication, add another relation:
juju add-relation pxc2:master pxc1:slave
In the same way circular replication can be setup between multiple clusters.
This charm supports the use of Juju Network Spaces, allowing the charm to be bound to network space configurations managed directly by Juju. This is only supported with Juju 2.0 and above.
You can ensure that database connections and cluster peer communication are bound to specific network spaces by binding the appropriate interfaces:
juju deploy percona-cluster --bind "shared-db=internal-space cluster=internal-space"
Alternatively, configuration can be provided as part of a bundle:
percona-cluster: charm: cs:xenial/percona-cluster num_units: 1 bindings: shared-db: internal-space cluster: internal-space
The 'cluster' endpoint binding is used to determine which network space units within the percona-cluster deployment should use for communication with each other; the 'shared-db' endpoint binding is used to determine which network space should be used for access to MySQL databases services from other charms.
Note: Spaces must be configured in the underlying provider prior to attempting to use them.
Note: Existing deployments using the access-network configuration option will continue to function; this option is preferred over any network space binding provided for the 'shared-db' relation if set.
Please report bugs on Launchpad.
For general charm questions refer to the OpenStack Charm Guide.
Read-only mirrors of all OpenStack code repositories (hosted at https://opendev.org/openstack by the OpenStack community)GitHub Repository Homepage